We may earn a commission when you buy through our links. How we make money
Elegoo runs a store for each country, with its own prices. The prices below are each store’s own on 16 November 2026. Shipping is free over £40 in the UK, €50 in Germany and $50 in the US.
Elegoo’s Mars 5 Ultra and Saturn 4 Ultra 16K are both resin printers for fine detail, and they are the two most often compared when someone chooses within Elegoo’s range. The difference is mostly size, screen and features. This comparison puts them side by side, using Elegoo’s pages and two published reviews.
- Choose the Mars 5 Ultra for small models, a first resin printer and a smaller budget. It is the compact one: a 7-inch screen and a 153 × 78 × 165 mm build volume.
- Choose the Saturn 4 Ultra 16K for larger models, several models per print, or a cold room. It has a 10-inch 16K screen, a 212 × 118 × 220 mm build volume and a heated tank.
- Both are listed at 150 mm/h maximum speed, so the larger printer is not faster; it holds more.
- Both use liquid resin: gloves, eye protection, ventilation, washing and curing apply to either.
- We have not tested either printer. Our sources are listed at the end.
Side by side
| Feature | Mars 5 Ultra | Saturn 4 Ultra 16K |
|---|---|---|
| Screen | 7-inch 9K mono LCD | 10-inch 16K mono LCD |
| Pixel size | 18 × 18 µm | 14 × 19 µm |
| Build volume | 153.36 × 77.76 × 165 mm | 211.68 × 118.37 × 220 mm |
| Maximum speed (maker’s figure) | 150 mm/h | 150 mm/h |
| Heated resin tank | Not mentioned in the reviews we read | Yes: Elegoo says the tank is held at 30 °C |
| Leveling | Not mentioned in the review we read | Auto-leveling, per Elegoo’s page |
| Camera | 720p without a light: the reviewer found timelapses grainy | Built in, for timelapse and live monitoring |
| Reviewer’s verdict | “A fairly capable machine for a very affordable price” (3DPrinting.com) | 4.6 out of 5 (3DWithUs) |
| Reviewers’ downsides | Grainy camera, a lid that is not hinged, slicer software features not working yet | No air filtration; live monitoring missing from Elegoo’s own slicer in the test |
| Warranty (Elegoo’s page) | Not covered by the pages we read | 12 months; LCD screen 3 months; resin tank and build plate 6 months |
What reviewers found
The 3DPrinting.com reviewer found the Mars 5 Ultra easy to set up, with nothing to assemble beyond the build plate and drip tray, and both test prints worked first time. Support removal was easier than on other printers, and a one-year ChituBox Pro subscription is included. The build volume is the limit: it suits figures and small parts.
3DWithUs rated the Saturn 4 Ultra 16K at 4.6 out of 5 and praised the build quality, the heated tank and the fast tilt-release printing. In its tests a 12-part model filled the build plate, and in a studio at about −3 to 4 °C there were no failed prints, with 5 to 25 minutes from preheating to printing. The reviewer found no major print failures.
What they cost in your country
Prices on Elegoo’s own stores on 16 November 2026, each in that store’s currency, with the store’s crossed-out earlier price in brackets. Both printers were in stock in all three stores. Prices move during Elegoo’s Black Friday sale, which Elegoo says runs until 1 December 2026.
| Printer | UK store | Germany store | US store |
|---|---|---|---|
| Mars 5 Ultra | £231 (was £289) | €279 (was €362) | $284 (was $338) |
| Saturn 4 Ultra 16K | £399 (was £576) | €469 (was €648) | $649.99 |
Elegoo also sells printers bundled with a wash and cure station and resin. On the same day the German store listed the Mars 5 Ultra with a Mercury Plus V3.0 bundle at €413 (was €573) and a complete Saturn 4 Ultra 16K bundle with a Mercury Plus V3.0 and resin at €644 (was €865.98), and the US store listed the Mars 5 Ultra with a Mercury Plus V3.0 bundle at $394 (was $501).
What else you will need
| You need | Why | Price seen |
|---|---|---|
| Resin | The liquid the printer hardens into a part. | Elegoo’s UK store sold Standard Resin, 5 kg, for £57.99 and its US store for $71.99. In Germany, Standard Resin started at €15.99. |
| Isopropyl alcohol (IPA), or water-washable resin | Washes uncured resin off prints. Water-washable resin is washed in water instead. | IPA is not sold by Elegoo. Elegoo also sells water-washable resin. |
| Nitrile gloves (5 mil or thicker) and splash-proof glasses | Liquid resin is hazardous until cured. Safety guides also advise good ventilation. | Not sold by Elegoo. |
| Wash and cure station | Washes and UV-cures prints. | Elegoo Mercury Plus V3.0: £120 (UK), €154 (Germany), $199.99 (US). |
| Spare FEP film | A wear item: one comparison lists FEP films and an eventual LCD replacement among resin’s running costs. | FEP film, 5 pcs for the Mars 4, 5 and 5 Ultra: €22.99 (Germany), $24.99 (US). |
Who should choose which
- The Mars 5 Ultra if you print small figures and parts, want the lower price, and this is your first resin printer.
- The Saturn 4 Ultra 16K if you print larger models or several at once, or the printer will sit in a cold room.
- Either, if you have a ventilated space, gloves and eye protection, and are ready to wash and cure each print.
- The Mars 5 Ultra if you want to print anything much larger than 153 × 78 × 165 mm.
- The Saturn 4 Ultra 16K if you only print small models: the extra size and price may not be used.
- Either in a bedroom or kitchen: safety guides say not to use resin there.
For the other Elegoo offers we have checked, see the Elegoo store page.
Questions people ask
Is the Saturn 4 Ultra 16K faster than the Mars 5 Ultra?
Not by Elegoo’s figures: both are listed at a maximum of 150 mm/h. The Saturn’s build plate is larger, so it can print more at once.
Does the Mars 5 Ultra have a heated resin tank?
The reviews we read do not mention one. The Saturn 4 Ultra 16K has a heated tank, which Elegoo says is held at 30 °C.
Which is better for beginners?
The 3DPrinting.com reviewer called the Mars 5 Ultra more than suitable for beginners and experienced makers alike. Either printer needs the same care with resin, gloves, ventilation, washing and curing.
Do I need isopropyl alcohol?
Only if you use ordinary resin. Water-washable resin is washed in water. Elegoo does not sell IPA, so you would buy it from a hardware or chemical supplier.
Are both printers sold in the UK, Germany and the US?
Yes. On 16 November 2026 both were in stock on Elegoo’s UK, German and US stores.
Sources
- Elegoo: Saturn 4 Ultra 16K product page (screen, heated tank, warranty table)
- 3DWithUs: Elegoo Saturn 4 Ultra 16K review
- 3DPrinting.com: Elegoo Mars 5 Ultra review
- Elegoo UK store: product pages (prices and stock seen on 16 November 2026)
- Elegoo Germany store: product pages (prices and stock seen on 16 November 2026)
- Elegoo US store: product pages (prices and stock seen on 16 November 2026)
- Elegoo: shipping policy (UK, Germany and US fees and delivery times)
- 3DPrinting.com: 3D printing safety guide (resin handling, gloves, IPA)
- 3DPrinting.com: FDM vs resin 3D printing (running costs of resin)
Facts, prices and links checked against these sources on 16 Nov 2026.



