We may earn a commission when you buy through our links. How we make money
Elegoo runs separate online stores for the UK, Germany and the US. Prices, stock, delivery times and free-shipping limits differ by store, so use the store for your country (see “Where to buy, and what shipping costs”).
Elegoo sells two kinds of 3D printer. Filament (FDM) printers melt plastic and draw a part layer by layer. Resin printers use light to harden liquid resin. They suit different people, and picking the wrong kind is the most common beginner mistake. This guide helps you choose the kind first, then the model.
- Want the easiest start, or bigger parts? Choose a filament printer, such as the Centauri Carbon 2 or the Neptune 4 Pro.
- Want fine detail, such as miniatures? Choose a resin printer, such as the Mars 5 Ultra or the Saturn 4 Ultra 16K, and be ready for gloves, washing and curing.
- Want more than one colour in a print? The Centauri Carbon 2 Combo adds a four-colour system.
- We have not tested these printers. This guide is built from Elegoo’s own pages and published reviews, all listed under Sources.
Resin or filament: pick the kind first
Resin prints are finer. They give smoother surfaces and sharper small details, which is why miniatures and jewellery are the usual reasons to buy one. Filament printers are better for larger parts: typical home filament printers build about 220 to 300 mm across, while home resin printers are usually 150 to 220 mm. Filament is also cheaper to run and quicker to finish. After a filament print you mostly remove supports. After a resin print you wash the part in isopropyl alcohol, cure it under UV light and remove the supports, which one comparison puts at 20 to 30 minutes every time.
The usual advice for a first printer is filament: the learning curve is gentler, the safety needs are simpler and the first print comes sooner. Resin makes sense when you specifically want miniature-grade detail and are willing to learn to handle it.
Filament printers
The Centauri Carbon 2 is a fully enclosed printer with a 256 × 256 × 256 mm build volume. Elegoo rates it for up to 500 mm/s, a maximum nozzle temperature of 350°C and a maximum bed temperature of 110°C. The Combo version adds Elegoo’s CANVAS system for printing in up to four colours. Notebookcheck called it a “solid entryway into the world of multi-color printing”, with the caveat that the software needs work.
- Multicolour printing at a budget price
- Fully enclosed, 256 × 256 × 256 mm
- Improved camera, lighting and monitoring
- Fairly quiet: measured at 44 to 47 dB, close to Elegoo’s claimed 45 dB
- Notebookcheck found connectivity inconsistent
- Multicolour prints made a lot of purge waste
- Print-time estimates ran over: some multicolour prints took more than 17% longer than the slicer predicted
The Neptune 4 Pro is the lower-priced filament printer: on 16 November 2026 it cost £189, €219 and $239 in the UK, German and US stores, against £299, €349 and $349 for the plain Centauri Carbon 2. It was in stock in all three stores (in the US store the ribbon-cable version was sold out and the Type-C version was in stock). It builds 225 × 225 × 265 mm, runs Klipper firmware and is rated for 500 mm/s, although its maker recommends 250 mm/s. Leveling can be automatic or manual, and the reviewer advises doing the manual step first. His complaints: the custom nozzles do not fit older Neptune or Creality nozzles, there is no paper manual, and it gets noisy at high speed.
Resin printers
The Mars 5 Ultra is the compact one. It has a 7-inch 9K mono screen, an 18 × 18 µm pixel size, a 153.36 × 77.76 × 165 mm build volume and a maximum speed of 150 mm/h. A reviewer on 3DPrinting.com found setup easy and both test prints succeeded first time, but noted a grainy 720p camera and some software features that were not working yet. The small build plate is the trade-off: it suits figures and small parts, not large ones.
The Saturn 4 Ultra 16K is the bigger, finer one. It has a 10-inch 16K mono screen (a 14 × 19 µm pixel size), a 211.68 × 118.37 × 220 mm build volume, a heated tank, tilt release and auto-leveling. 3DWithUs rated it 4.6 out of 5 and listed the lack of an air filtration system, and live monitoring missing from Elegoo’s own slicer in his test, as the downsides. Elegoo’s product page lists a 12-month warranty on the machine, with the LCD screen covered for 3 months and the resin tank and build plate for 6 months.
| Model | Type | Build volume (mm) | Maximum speed (maker’s figure) | Notable |
|---|---|---|---|---|
| Centauri Carbon 2 Combo | Filament, enclosed | 256 × 256 × 256 | 500 mm/s | Four-colour system |
| Neptune 4 Pro | Filament | 225 × 225 × 265 | 500 mm/s (250 recommended) | Klipper firmware |
| Mars 5 Ultra | Resin | 153.36 × 77.76 × 165 | 150 mm/h | 7-inch 9K screen |
| Saturn 4 Ultra 16K | Resin | 211.68 × 118.37 × 220 | 150 mm/h | Heated tank, tilt release |
What it costs in your country
These are the prices on Elegoo’s own UK, German and US stores on 16 November 2026, each in that store’s currency. The figure in brackets is the crossed-out earlier price the store showed. All four printers were in stock in all three stores. Prices move during the Black Friday sale, which Elegoo says runs until 1 December 2026.
| Model | UK store | Germany store | US store |
|---|---|---|---|
| Centauri Carbon 2 Combo | £380 (was £398) | €399 (was €439) | $399 (was $449) |
| Neptune 4 Pro | £189 (was £290) | €219 (was €299) | $239 (was $274) |
| Mars 5 Ultra | £231 (was £289) | €279 (was €362) | $284 (was $338) |
| Saturn 4 Ultra 16K | £399 (was £576) | €469 (was €648) | $649.99 |
What else you will need
The printer is only part of the cost. Here is what each kind needs besides the machine, with Elegoo’s own prices where the store sells it (seen on 16 November 2026, each in that store’s currency).
| You need | Why | Price seen |
|---|---|---|
| Filament (PLA is the usual first material) | Filament printers print from it. | PLA Basic Filament, 10 kg refill: £84.99 (UK), €96.99 (Germany), $99.99 (US). |
| Resin (resin printers) | The liquid the printer hardens into a part. | Standard Resin, 5 kg: £57.99 (UK), $71.99 (US). In Germany Standard Resin started at €15.99. Elegoo also sells water-washable resin. |
| Isopropyl alcohol, IPA (resin printers) | Washes uncured resin off the part. Not needed for water-washable resin, which is washed in water. | Not sold by Elegoo: buy it from a hardware or chemical supplier. |
| Nitrile gloves, 5 mil or thicker, and splash-proof glasses (resin printers) | Resin is hazardous until cured. Thin food-prep gloves let it through. | Not sold by Elegoo: any hardware or safety supplier. |
| Wash and cure station (resin printers) | Washes and UV-cures prints in sealed chambers. | Elegoo Mercury Plus V3.0: £120 (UK, was £150), €154 (Germany, was €211), $199.99 (US). |
| Spare FEP film (resin printers) | A wear item: one comparison lists FEP films, IPA, gloves and an eventual LCD replacement as the running costs of resin. | FEP film, 5 pcs for the Mars 4, 5 and 5 Ultra: €22.99 (Germany), $24.99 (US). |
Which one for whom
- A filament printer if this is your first printer, you want bigger parts, or you do not want to handle chemicals.
- The Centauri Carbon 2 Combo if you want to try multicolour prints and can live with software that is still being fixed.
- A resin printer if you want miniature-grade detail and have a ventilated space, gloves and eye protection.
- A resin printer if you would use it in a bedroom or kitchen, or you do not want to wash and cure every print.
- A small resin printer such as the Mars 5 Ultra if you want to print large parts.
- The Combo if you only print in one colour: the plain Centauri Carbon 2 costs less (£299, €349 and $349 on 16 November 2026).
Where to buy, and what shipping costs
Elegoo’s own shipping policy gives these terms. In the UK, orders under £40 pay £6 and orders over £40 ship free, with delivery in 3 to 7 working days from a UK warehouse. In Germany, orders under €50 pay €6 and orders over €50 ship free, with delivery in 2 to 5 working days from an EU warehouse. In the US, orders under $50 pay $15 and orders over $50 ship free, with delivery in 3 to 7 working days. Each country has its own store, so buy from the one for your country: uk.elegoo.com, de.elegoo.com or us.elegoo.com.
We could not confirm Elegoo’s return window from its pages, so we do not state one.
For the other Elegoo offers we have checked, see the Elegoo store page.
Questions people ask
Is resin or filament better for a beginner?
The usual advice is filament. It has a gentler learning curve, simpler safety needs and a quicker first print. Choose resin first only if you specifically want miniature-grade detail and are ready to learn to handle liquid resin.
Do I have to wash and cure resin prints?
Yes. A resin print comes out coated in uncured resin. You wash it, either in isopropyl alcohol or in water if you use water-washable resin, then cure it under UV light and remove the supports. One comparison puts this at 20 to 30 minutes for every print.
Is a resin printer safe to use at home?
It can be, with care. Safety guides advise nitrile gloves of 5 mil or thicker, splash-proof eye protection and good ventilation, and say not to use resin in a bedroom or kitchen. Uncured resin and used isopropyl alcohol need careful disposal.
Which Elegoo printer prints in more than one colour?
The Centauri Carbon 2 Combo. It comes with Elegoo’s CANVAS system, which prints in up to four colours. Reviewers note that multicolour prints produce purge waste and that the software still needs work.
Does Elegoo sell and ship to the UK, Germany and the US?
Yes. Elegoo runs a store for each country, and all four printers in this guide were in stock in all three on 16 November 2026. Orders over £40 in the UK, over €50 in Germany and over $50 in the US ship free.
Sources
- Elegoo: shipping policy (UK, Germany and US fees and delivery times)
- Elegoo UK store: product pages for the four printers, filament, resin and Mercury Plus V3.0 (prices and stock seen on 16 November 2026)
- Elegoo Germany store: the same products (prices and stock seen on 16 November 2026)
- Elegoo US store: the same products (prices and stock seen on 16 November 2026)
- Elegoo: Saturn 4 Ultra 16K product page (screen, heated tank, warranty table)
- Notebookcheck: Elegoo Centauri Carbon 2 Combo review
- 3DWithUs: Elegoo Neptune 4 Pro review
- 3DPrinting.com: Elegoo Mars 5 Ultra review
- 3DWithUs: Elegoo Saturn 4 Ultra 16K review
- 3DPrinting.com: FDM vs resin 3D printing
- 3DPrinting.com: 3D printing safety guide (resin handling, gloves, IPA)
Facts, prices and links checked against these sources on 16 Nov 2026.



